A gentle, beautifully curved line, well-balanced size and weight, and the finest stainless steel gloss to give you goosebumps. In the end (and this is no word of exaggeration) this single tonearm has become a natural conduit for experiencing “original pure sound”. When you finally experience it, you will be thrilled by the quality of sound that can never be described as merely an “accessory”.
With its traditional name revived to meet the present age, ‘THE’ GLANZ takes centre stage wearing its new crown!
THE GLANZ – as perfect as a work of art
MH-124S Premium
The “Jewel in the Crown” – the “premium” highest-grade model, acknowledged as delivering the most trusted performance
In pursuit of the ultimate tone arm for further enhanced performance, we have introduced features that take you beyond the S model, as follows:
Approximately 30 parts are coated in DLC (Diamond-Like Carbon) – the sound rise is outstanding. With the addition of carbon fibre to the arm pipe, even more powerful vibration prevention measures are applied. Furthermore, the arm pipe uses a thin silver wire of low resistance, and silk roll is used for the coating of the flow line, ultimately damping it with vibration proof materials. Around the weight, a quadruple damper system using different materials has been adopted, and vibration absorption is achieved over a wide range.
SPECIFICATIONS
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
340mm
Effective Length (From centre of tonearm Base to stylus tip):
305mm
Practical Length (From centre of tonearm Base to centre of turntable):
290mm
Offset Angle:
20 °
Adaptable cartridge weight (incl headshell):
12～31g(40g)
Total weight:
1.12kg
Overhung:
15mm
Tracking weight range:
0.5g (Minimum scale) – over 10g (5g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
• The weight is heavy, so a weighty cartridge such as OrtofonSPU can be used without having to move it to the back.
• The weight is placed near the fulcrum, therefore the tracing is improved and it gives out dramatically solid sound.
• Much Less distortion and much clearer sound quality due to significantly modified damper design.
SPECIFICATIONS
MH-900S - 9Inch
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
255mm
Effective Length (From centre of tonearm Base to stylus tip):
229mm
Practical Length (From centre of tonearm Base to centre of turntable):
214mm
Offset Angle:
23 °
Adaptable cartridge weight (incl headshell):
16～49g
Total weight:
1.04kg
Overhung:
15mm
Tracking weight range:
0.5g (Minimum scale) – over 10g (5g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
41～70mm
Headshell weight:
12g (incl screws and lead wires)
Shaft dimensions to mounting base:
16mmΦ
Mounting hole size:
30mmΦ
Fixing depth size:
Up to 20mmt (Another size is available)
MH-1000S - 10 Inch
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
280mm
Effective Length (From centre of tonearm Base to stylus tip):
254mm
Practical Length (From centre of tonearm Base to centre of turntable):
239mm
Offset Angle:
22 °
Adaptable cartridge weight (incl headshell):
16～46g
Total weight:
1.07kg
Overhung:
15mm
Tracking weight range:
0.5g (Minimum scale) – over 10g (5g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
41～70mm
Headshell weight:
12g (incl screws and lead wires)
Shaft dimensions to mounting base:
16mmΦ
Mounting hole size:
30mmΦ
Fixing depth size:
Up to 20mmt (Another size is available)
MH-1200S - 12 Inch
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
330mm
Effective Length (From centre of tonearm Base to stylus tip):
305mm
Practical Length (From centre of tonearm Base to centre of turntable):
290mm
Offset Angle:
20 °
Adaptable cartridge weight (incl headshell):
16～43g
Total weight:
1.14kg
Overhung:
15mm
Tracking weight range:
0.5g (Minimum scale) – over 10g (5g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
• The arm pipe and vertical shaft parts (which greatly influence sound quality) are made from stainless steel.
• Along the main conduction tube we have reproduced a material close to stainless steel supplement, using brass with a tough chrome plating
• The fulcrum is strongly supported with radial bearings
• The inside force canceler, Arm Resting Device and Arm Lifting Device are insulated with ABS resin, and reduces reverberation distortion
SPECIFICATIONS
MH-9B
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
252mm
Effective Length (From centre of tonearm Base to stylus tip):
229mm
Practical Length (From centre of tonearm Base to centre of turntable):
214mm
Offset Angle:
23 °
Adaptable cartridge weight (incl headshell) When the sub weight is attached, you can use a head shell and cartridge with a combined weight up to 40g:
11～28g
Total weight:
700g
Overhung:
15mm
Tracking weight range:
0.25g (Minimum scale) – over 6g (3g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
41mm～
Headshell weight:
option
Shaft dimensions to mounting base:
16mmΦ
Mounting hole size:
24mmΦ
Fixing depth size:
Up to 29mmt (Another size is available)
MH-10B
Balancing:
Static
Total Length (From counter weight shaft end headshell terminal):
277mm
Effective Length (From centre of tonearm base to stylus tip):
254mm
Practical Length (From centre of tonearm base to centre of turntable):
239mm
Offset Angle:
22 °
Adaptable cartridge weight (incl headshell) When the sub weight is attached, you can use a head shell and cartridge with a combined weight up to 40g:
11～26g
Total weight:
730g
Overhung:
15mm
Tracking weight range:
0.25g (Minimum scale) – over 6g (3g/360 °rotation)
Adjustable height (From plinth surface to horizontal height of arm tube):
